My Cart
You have no items in your shopping cart.
A Guide To Polycarbonate Cleaning
By Anna Walter
Are you captivated by having luxury transparent walls all around? You might have glass barriers in your house, workspace, or in any other form. Well, for outer walls the sturdier glass has been opted mainly, and no other glass can stand well against damage than polycarbonate glass. It’s best known for its strength and high-end transparency. But, maintaining its glossy surface is a little tricky! Sometimes we’re using the wrong methods or cleaners to clean the polycarbonate glass which results in severe problems including hard stains, fadedness, and even damage to the UV-protecting layer. In this blog, we’re going to disclose the simplest polycarbonate cleaning method to retain its gloss.
Table of Contents
Use of Improper Cleaners Can Damage Polycarbonate
To give your glass walls a clean and shiny look, you use a lot of glass cleaners. Some of them might be too expensive as well, but are they worth it? If you still get stains, or can’t retain its glaze then you better should leave those cleaners today, as you’re feeding damage to your polycarbonate glass. The market uses harsh chemicals to quickly remove the stains from glass, but eventually, they build up a white fumy layer or damage the UV-protecting layer on it. So, how to clean polycarbonate, and what’s the best way for a quick and thorough clean up? Check out the step-by-step procedure below.
Tips for Polycarbonate Cleaning
Depending on where polycarbonate glass has been installed, you should plan to clean it accordingly. If you have used polycarbonate glass in skylights, the constantly falling leaves and dew drops may fade its light-transmitting property. So, you should clean it every once a month. Polycarbonate glass can easily resist debris for a long time if you deep cleanse it, but in a normal routine, a dry wipe is enough to keep them clean.
Here’s What You’ll Need:
- Mild detergents
- Vinegar
- Lukewarm water
- Microfiber Cloth
How to Clean Polycarbonate
Go Ahead With Removing Debris!
First things first, no matter what polycarbonate item you’re dealing with to clean, start with removing any debris or dirt on the glass. Well, it may include any pebbles, dirt, offshoots, mud, or any other such things. Removing all the debris particles makes sure that you don’t have to scratch the glass.
Rinse with Lukewarm Water!
Simply begin with a quick rinse. This will remove any visible or immense amounts of dirt from the glass and make the rest of the polycarbonate cleaning process a breeze. Avoid scratching or scrubbing the glass too hard, so it will still be awesome to use in the long run.
Apply Cleaning Solution!
Pick some mild detergent or soap for this cleaning task. If you have one, add it to lukewarm water in a bucket and mix it well. Or you can use white synthetic vinegar and dilute it with equal portions of water to prepare the natural and effective glass cleaning solution.
Now, simply take a microfiber cloth or soft sponge, dip it in the solution, and start scrubbing the glass pane. Make sure not to scratch it and apply medium pressure so that dirt or any hard water spots can easily come off.
Rinse the Glass Again!
Once you’re done scrubbing the polycarbonate, rinse it thoroughly with lukewarm water one more time. You will notice if any other dirt or spots are still left, just repeat the process. Don’t worry, you may have to repeat this 1 or 2 times if your polycarbonate items aren’t cleaned for a while.
Dry It with a Microfiber Cloth!
Take a dry microfiber cloth and minutely dry the entire glass pane to avoid any streaks or water spots.
Repeat If Necessary!
If you’re working with larger polycarbonate items like rooftops, skylights, or glass walls, then you may have to repeat the process at least 2 times to clean it thoroughly.
When to Replace a Polycarbonate Sheet?
Top-notch polycarbonate usually lasts up to 10 to 15 years. The majority of the manufacturers make sure of that, but there could be further incidents in which you have to replace the polycarbonate sheet. Let’s say;
- UV coating may be worn out
- Hard scratches on the sheet
- Cracks growing larger
- Replace the Sheet if doesn’t fit well
Here, Fab Glass and Mirror offers you the best quality and highly customizable polycarbonate sheet as the finest replacement transparent sheet. Our manufacturers make sure of the exclusive quality, durability, high impact resistant nature, and more. You get 5 times better insulation with our polycarbonate sheets and they are really inexpensive. Decide, order, and enjoy years of shiny and sturdier polycarbonate sheets around.
