How to Remove Shower Doors Yourself – A Quick DIY Guide
Glass shower doors are in trend! And for some good reason, they uplift the impression of your bathroom interior. As far as their maintenance is concerned, they are quite easy to clean and sustain. Sometimes, there are such circumstances in which you have to replace or remove a shower door, so you immediately call for help, but they’re not available at the moment or they charge somewhat high. Why waste your dollars on such a trivial thing, when you can do it by yourself?
Yes, you can now remove your old shower doors by yourself. This in-depth guide on how to remove a shower door will be proved very helpful for you guys. Some people get frustrated with bathtub shower doors, so they prefer walk-in showers or shower curtains. Whereas some might be thinking of replacing a new shower door. Well, that’s your choice, also if you’re searching for a guide on how to install a frameless shower door by yourself, you can check it out here.
Table of Contents
Problems That Cause to Remove a Shower Door
As we have mentioned before, there can be several reasons for putting down shower doors. If you ask me, I will only put down my shower door when I have to replace it with a new one. But some people got bad luck with shower doors as they have faced the following problems;
Trouble in Cleanliness
Few people raised their decision of taking down shower doors because they find glass sliding shower doors difficult to clean. It can be true, somewhat, when its rims are not properly blocked and glued, they can absorb a lot of dust and even its metal is rusted. If you’re facing such an issue then it’s more likely to remove your sliding shower door.
Bulky or Cutting Down Space in Small Bathrooms
Shower doors may create a sense of spacious bathrooms because they reflect light but they are fixed, unlike shower curtains. Apart from illuminating the whole space, some people don’t like shower doors in their small bathrooms, as it appears to be a hurdle in small bathrooms.
Broken Glass Door
One more reason why you chose to remove a shower door can be its fragility or if the glass door has been broken, accidentally. This can be dangerous, immediately remove it with care.
Tools You Will Need While Removing a Shower Door
- Plastic scraper or an old credit card
- Caulk gun
- Silicone caulk
- Utility Knife/Blade
- Screwdriver
Steps – How to Remove Shower Door
Here you will get an answer to your most asked question ‘how to remove the sliding shower door’. Follow these easy steps to carefully and safely remove the sliding shower door.
Remove the Doors
The very first step is to carefully remove the doors from the frame. This can be different for everyone, depending upon the frame of their shower door. In some cases, the upper rim is not attached so that you can easily remove the door from the frame. Observe your frame structure and remove the door accordingly. Taking someone’s help here will ease your work, as doors are a bit heavy.
Remove Screws From the Frame
Next, you have to use a screwdriver and detach all the screws from the frame. Try not to put extra force, as it will destroy your wall or bathtub, remove them gently.
Disassemble the Shower Door Frame From All Around
Now, gently disassemble the frame from the wall by using a utility knife, cutter, or blade. Place a knife parallel to the frame and wall, so that you can easily dispatch the caulked joints if any left behind. Handle this task carefully, try to avoid cuts on walls.
Remove Top Rack Then Side Frames
After you have successfully disassembled the frame, remove the top rack or rim first. It will ease your removing task and that’s how a frame is attached. Dissembling the top rack will allow you to examine the next steps. Then remove side frames, one by one.
Remove Bottom Rail
Removing the bottom rail is easy enough when you have removed all the screws, but don’t be worried about seeing holes in your tub. They are going to be filled up.
Scrape off the Caulk
You will notice that you had put excessive caulk to assemble your frame, but, don’t worry it can be removed with the help of an old credit card or plastic scraper. Gently remove all the caulk from walls, bathtub, and all-around or you can use a caulk remover gun if it’s available.
Fill up the Screw Holes With Silicone Caulk
Now, proceed your hard work to the last step, which is filling up the holes or screws. For this purpose, you have to use a silicone caulk and then leave it for some time, until it is completely dried. Here, you have successfully removed your sliding shower door like a pro!
Bottom line!
Removing a sliding shower door is far easier than installing it. You can either hire a professional for this task or DIY remove your shower door. All you need to do is to follow a guideline and grab the required tools. Replace your old shower door or remove it and organize your bathroom interior, just as you desire!