How to Remove Hard Water Stains from Glass
Also known as limescale, mineral build-up or hard water deposits on the glass when water containing minerals evaporate on the surface of the glass. When the water evaporates, it leaves behind minerals like magnesium and calcium. With time, the minerals dissolve, leaving behind spots on the glass and it gets quite difficult to remove hard water stains from shower door.The cloudy spots are usually stubborn and cannot be removed using regular glass cleaning products. However, this does not mean that you cannot get rid of stubborn stains. There are natural products you use daily at home, perfect for the job.
Table of Contents
Causes of Hard Water Stains on Glass Windows and Shower Doors
Understanding how hard water stains develop and what causes them is essential. This will help you determine how to remove hard water stains from glass and know the best prevention methods. Here are the main causes of hard water stains.
1. Water Left to Dry on Glass Surfaces
Sometimes, you can’t avoid spills on your table or prevent water from getting in contact with your glass shower doors as you take a bath. However, what you do after you take bath, is what will determine whether or not you will retain the appeal of your glass surfaces.
Leaving water to dry on glass surfaces gives minerals such as magnesium present in water, time to dissolve in glass, forming cloudy stains.
2. Sprinkler Systems Spraying Water on Glass
Most of the hard water stains formed on doors close to your yard or lawn are usually caused by the sprinklers you use to keep your grass green. Since the doors are usually exposed to the sun and wind, the water dries much faster than for surfaces inside the house. Keeping the sprinklers away from your doors will prevent your glass doors from getting damaged.
If this cannot be avoided, consider installing water filters or using water softeners to ensure that the water that gets in contact with your glass doors does not contain any minerals.
3. Silica Leaching into Glass
Framed glass doors have one disadvantage; they trap water, which ends up corroding the glass. Silicone is found in water. Silicon halogens are extremely corrosive and can damage glass. The longer silicone is trapped in the seals, the more it leaches into the shower glass doors and corrodes it and forms stains at the same time.
Using frameless glass doors can prevent corrosion caused by water held by the seals.
4. Metal Fly Screen Doors
Metal fly screens are often used to avoid wasps, insects, and air pollution. Metal fly screens used on glass doors can result in hard water stains. If iron interacts with a wet glass, the iron ions interact with it, resulting in stains. The stains form through oxidation. The stain is usually insoluble, hence, hard to remove. To prevent it, one can use reagents that prevent the corrosion of iron. For instance, you can use galvanized iron for the metal fly screen doors.
5. Faulty Roof Drains
Defective roof drains not only spoil the foundation of your home, but they can also cause stains on your glass windows or doors. A leaking roof can also cause damage to your glass furniture. Here is why.
Tiles for the roofs are usually made of limestone. Calcium and magnesium are components of limestone. If water flowing from the roof gets in contact with your glass doors or furniture, the minerals dissolve in the glass, forming stains.
Repairing your roof will go a long way in preventing your glass furniture from getting stains. Roof repair should be done at least every two years if it is an old home and every five years if the home is not too old.
How to Remove Hard Water Stains from Shower Door and Glass Window
No one loves stained windows, tables, and other glass products. They are unsightly, and that is why you need to do something about them. Here is how to remove hard water stains from glass.
1. Using Liquid Cleaners to Remove Hard Water Stains
i. Acidic Cleaners to Remove Hard Water Stains:
Hard water stains are alkaline. Acids work perfectly in removing basic stains. This means that you should use liquid glass cleaners that contain hydrochloric acid, sulphuric acid, and phosphoric acid. Most of the products have instructions on how to use them. It is essential to read through them for the best results.
Note that the cleaners will work by breaking down the salts. These products might be corrosive, and as much as they work on most surfaces, they could damage others. Do not make assumptions. You could try it on a small part of a surface and see how it works. If it is not damaging, you can proceed.
Acidic products are toxic. It is essential to stay safe by wearing protective clothing like gloves while using them. Your eyes should also be protected, and if there is food around, cover that as well.
ii. Salt and Water Solution:
This is probably the easiest solution to cleaning stubborn hard water glass stains. It is something that you can easily make. All you need is salt and water. How does it work? The salt scours the satins away. The mixture should not be too watery. Balance it so that it forms a paste. Use the paste on the stained area. Scrub it until the stain fades away. Once done, use a clean cloth to wipe out the residue. You do not want to leave more stains on the surface.
iii. White Vinegar:
Vinegar is acidic. However, it is not as concentrated as hydrochloric acid. It is very effective in loosening the mineral deposits that form stains on glass surfaces. The beauty of using white vinegar is that it does not corrode surfaces; more so, it is not toxic. You, therefore, don’t need to cover your eyes while using it.
Also, you could do something to make it more effective: add lemon juice to it. Remember that lemon juice is also acidic. Here is how you go about it.
Mix lemon juice and vinegar in a spray bottle. It works best when warm: warm it in the microwave or the oven. Don’t let it stay too long: 30 seconds is enough. Spray the warm vinegar and lemon juice mixture and let it sit for a few minutes, then wipe it with a lint-free cloth. While warming the mixture, leave the bottle open. If closed, the pressure will build up, and it might end up exploding. On top of increasing its effectiveness, the lemon gives the cleaning product a refreshing scent.
iv. Use Ammonia alongside Basic Cleaning Products:
If you are using the basic cleaning products, consider adding ammonia. This will work better. On top of their effectiveness, you also get to benefit from the ability of ammonia to break down hard water stains.
2. Non-liquid Cleaners
i. Use Magic Cleaning Pads
You don’t have to dwell on the liquid products to remove hard water stains from a glass surface. There are other simple ways that you can do it. Cleaning pads are kind to the surface and will effectively remove the stains without scrubbing. Note that glass is sensitive, and scrubbing can leave marks on the surface. Using cleaning pads to remove such spots will leave your glass surface pristine and clean.
ii. Use Toothpaste:
Using toothpaste on glass surfaces is another effective hack. Toothpaste is basic and cuts through the dissolved salts on the glass surface. It is a pretty simple process. Use a lint-free towel. Apply toothpaste on the towel and rub it on the surface. To make your work thorough, use circular motions. Ensure that you have worked through all the stained areas, once you are positive that all the stains are removed, let the toothpaste sit for a couple of minutes. Get water and vinegar in equal amounts and use it to clear the residue until your surface is spotless.
iii. Use Baking Soda:
Baking soda is yet another natural product that you have at home that can be used to remove stains from glass surfaces. However, you need to be careful about the tools you choose to use on the glass surface. It is not advisable to use brushes with hard bristles; they will spoil the surface. Work with soft bristles to avoid scratching the glass surfaces.
It is also worth noting that this method is usually effective with smaller and less set-in stains.
iv. Use Quality Commercial Cleaners:
If you check through the shelves of your favorite store, you will find several cleaning products. Instead of making the cleaning agents at home, you can buy commercial cleaners. Most of the cleaners come in paste form. Using commercial cleaners is less tedious than the other agents, mainly because you don’t have to deal with watermarks afterward. Most manufacturers attach instructions, following them to the core will always give you the best results.
Glass furniture and doors are appealing. However, they are not pleasant if they have stains on them. This is why you need to know how to remove hard water stains from glass. For a quick guideline you can check the link.
Prevention is Better Than Cure
The best way to keep your glass surfaces spotless is preventing the stains from forming in the first place. The following tips will go a long way in making it easier for you to get rid of hard water stains, or not having them at all.
1. Clean Your Glass Surfaces Regularly
Note that glass shower doors get in contact with water every time someone uses the shower. The minerals in the water build-up and dissolve in the glass surface and form hard water stains eventually. To prevent the water from drying into stains, always ensure that your shower doors or glass surfaces are dry. Use a dry towel to wipe the water away from the surfaces every time they get in contact with it.
As you plan on cleaning your house, always set aside time to thoroughly clean glass every week to prevent build-up. The longer you let the stain stay, the tougher it gets, and the harder it gets to remove it.
2. Prevent the Stains Formation
You don’t have to wait until the stains form for you to remove them. You can stop them before they even happen. Note that the problem is usually the level of mineral content in your water. Doing something about the PH will work wonders.
Most of the homeowners use water softeners to tone down hard water. A water softener removes the minerals in the water. This ensures that even before the water runs through your faucets or showerhead, there are no minerals that can damage your glass. You also have the option of incorporating a filter to your water system. That way, you won’t have to stress about doing a thorough clean up every week.
3. Treat Your Glass Surfaces
Laminating and applying a protective coat on your glass tables a couple of times every year will do you great. Coasters are often underestimated, but they do a great job of protecting your glass surfaces. Minerals like calcium that cause glass stains are not only present in water. Most of the drinks you take contain the minerals. Spills always happen, and the moment they get in contact with your glass for too long, which will be it. While serving your guests or placing drinks on glass tables, use coasters and mats. They will protect it from spills.
Glass furniture and doors are appealing. However, they are not pleasant if they have stains on them. This is why you need to know how to remove hard water stains from glass. Well, there are preventive measures you can take to prevent the stains from building up. These measures include ensuring glass surfaces are dry, using frameless shower doors, and fixing your leaking roof.
If you are unable to prevent hard water stains building up, clean your glass surfaces regularly, using the available glass cleaners. They include acidic cleaners, salt, and water solution, vinegar, adding ammonia to your regular glass cleaner, and using baking soda. Not only does removing hard water stains enhance the overall cleanliness of your home, but it also increases its lifespan.